Monogram ZSC120XJSS Instrução De Instalação

NOTE: For UTC models PSB9120 and ZSC1201

 

only.

A   Open the accessory drawer so you have 

access to the top bracket.

B   Remove the three screws securing the top 

bracket.

C   Install the new UTC mounting bracket using 

the screws removed previously.

D   Close the drawer and proceed with the 

installation.

‡ 5HPRYHWKHGUDZHUIURPWKHFDUWRQ
‡ 5HPRYHDOOSDFNLQJPDWHULDODQGWDSH
‡ 2SHQWKHGUDZHUDQGUHPRYHDQ\SDUWVLQVLGH
‡ /RFDWHSDUWV

Assembly Instructions

Side Supports (2)

A   Place storage drawer on a surface with  

the front of drawer hanging over the edge  

of the surface. Not placing the front edge  

of drawer over the edge of the surface may 

result in damage to the drawer since the front 

edge of drawer hangs below the bottom  

of drawer.

B   Place the oven on top of the storage drawer.  

Make sure that the back and sides of the oven 

align with the back and sides of drawer.

 

NOTE: The bottom of the oven side flanges will 

sit directly in front of the top of the storage 

drawer side flanges.

Under-the-Counter 

(UTC) Mounting Bracket

Color-Matched 

Screws  

(4 required,  

1 extra)

Screws  

(6 required,  

2 extra)