Monogram ZSA1201RSS Manual

30

Other Advantium Features

Use this feature to set the surface light to 

come on and go off at a certain time.  

1. Press the SETTINGS pad, turn the dial to 

select AUTO NIGHT LIGHT and press the 

dial to enter.  

2. Select SET ON TIME and press the dial to 

enter.  

3. Turn the dial to set on time hour and 

minutes, press the dial to enter.  Turn the 

dial to set off time hour and minutes, press 

the dial to enter.  Note: Setting the hours 

sets AM/PM.

To disable the Auto Night Light feature, press 

the SETTINGS pad, turn the dial to select 

AUTO NIGHT LIGHT and press the dial to 

enter.  Turn the dial to select DEACTIVATE and 

press the dial to enter.

To check the Auto Night Light on and off 

times, press the SETTINGS pad, turn the dial 

to select AUTO NIGHT LIGHT and press the 

dial to enter.  Turn the dial to select REVIEW 

ON/OFF TIMES and press the dial to enter.  

The display will show the on and off time for 

the Auto Night light.
Note:  

• Auto Night Light will turn on the surface

light to the night setting, when the clock 

time matches the Auto Night Light on time, 

even if the surface light is on the bright 

setting.

• Auto Night Light will always turn the

surface light off when the clock time 

matches the Auto Night Light off time if the 

surface light is turned on.

To change temperature units, press the 

SETTINGS pad and select TEMPERATURE 

UNITS. Turn the dial to select F or C and press 

the dial to enter.

Use this feature to delay when the oven will 

start cooking in CONV BAKE, COOK By TIME, 

COOK By TIME 1&2, DEFROST By TIME, or 

DEFROST By WEIGHT.

1.  Press the COOKING OPTIONS pad.
2.  Turn the dial to select DELAy START and 

press the dial to enter.

3.  Turn the dial to set the start time hour 

and minutes, press the dial to enter.           

NOTE:  Setting the hours sets AM/PM.

4.  Set the cooking mode. 

The oven will start the programmed cooking 

mode when the clock time and the delay 

start time are the same.

Use this feature to keep the turntable from 

turning when using a dish is too large to 

rotate in the cavity. 
TURNTABLE ON/OFF is not a permanent 

setting.
Press the SETTINGS pad, turn the dial to 

select TURNTABLE ON/OFF and press the dial 

to enter.  Turn the dial to select TURNTABLE 

ON or TURNTABLE OFF, press the dial to 

enter.

Note: 
• The turntable will not turn off in Speedcook,

Broil, Toast, or Microwave Sensor modes.

• A cooking cycle must be started within 5

minutes of turning the turnable off, or the 

turntable will reset to the on setting.

• The turntable will also remain off for

cooking cycles started within 5 minutes of 

the end of any cooking cycle for which the 

turntable was off.