Thermador PRL366JG Instrução De Instalação
1901 Main Street, Suite 600, Irvine, CA 92614
9000839141 • Rev. A • 5U04JE • © BSH Home Appliances Corporation, 10/12
Installing the Leg Covers
1.
Remove plastic coverings from the stainless steel
covers.
covers.
2.
Place the smaller cover, with cutouts facing up, inside
the larger cover with the openings of both stacked and
facing the back.
the larger cover with the openings of both stacked and
facing the back.
3.
Beneath the range, wrap the cover assembly around
the leg.
the leg.
4.
Slide the outer cover up while the inner piece remains
on the floor. The mating part has dimples for which the
holes of the larger cover should seize. You should feel
a definitive click, letting you know that the cover
assembly has been mounted to the unit.
on the floor. The mating part has dimples for which the
holes of the larger cover should seize. You should feel
a definitive click, letting you know that the cover
assembly has been mounted to the unit.
5.
Secure the cover assembly through the dimpled holes
with (2) ½” stainless steel Torx head screws (included),
as shown below.
with (2) ½” stainless steel Torx head screws (included),
as shown below.
6.
Repeat for all visible legs.
•
If additional leg covers are required, they may be
ordered from the service center by calling
1-800-735-4328 at no charge for up to one year
after purchase date of the appliance. When
ordering, refer to Leg Cover Kit part no. 751305.
ordered from the service center by calling
1-800-735-4328 at no charge for up to one year
after purchase date of the appliance. When
ordering, refer to Leg Cover Kit part no. 751305.
Dimples