Philips TV antenna SDV5120 SDV5120/10 Manual Do Utilizador

7

English

EN

 

Note

It is possible to turn the gain control knob down for 

 

•

best reception.

Set up a digital tuner with this 

antenna

You can install available channels with the digital 

TV tuner. This automatic process is part of the 

setup of the tuner. Ensure the antenna has 

set up properly before the tuner can receive 

viewable channels.
There are two ways to connect the antenna to 

the TV:

Connect the antenna to a digital tuner. 

• 

If the signal strength is good enough, the 

channels can be memorized in the tuner 

automatically .
Connect the antenna directly to the TV. 

• 

Tune to the analogue channels and find 

the best antenna location. Then re-

connect the antenna to the digital tuner. 

Ensure the signal strength is good enough 

before you install the channels with the 

tuner.

Note

It is possible to turn the gain control knob down for 

 

•

best reception.

For UHF reception
1

  Turn the TV to the desired channel/

station.

2

  To turn the amplifier up, rotate the gain 

control knob towards the max position. 

  

3

  Tilt or swivel the UHF loop antenna 

towards the transmitter until the 

reception is achieved.