Whirlpool WFC340S0A Instrução De Instalação

1. Align the forward drawer notches with the notches in the 

drawer glides on both sides.
Place the rear alignment tabs into the drawer glides on both 
sides.

2. Push the warming drawer or premium storage drawer in all 

the way.

3. Gently open and close the warming drawer or premium 

storage drawer to ensure it is seated properly on the glides 
on both sides.

The storage drawer can be removed. Before removing, make sure 
drawer is cool and empty.

1. Pull the storage drawer straight back to the drawer stop.

2. Lift up the front of the drawer and pull the drawer out.

1. Lift up the front of the drawer and place the rear of the drawer 

inside the range so that the drawer stop notch is behind the 
drawer glide.

2. Lower the drawer so that the edge of the slide rail drops into 

the slot in the drawer glide.

3. Slowly push the drawer into the range.

NOTE: When properly installed, the rear slides on the bottom 
of the drawer will engage the base rails and the drawer will 
not tip when items are placed in the drawer.

For normal range use, it is not suggested to remove the oven 
door. However, if removal is necessary, make sure the oven is off 
and cool. Then, follow these instructions. The oven door is heavy.

1. Open oven door all the way.
2. Pinch the hinge latch between two fingers and pull forward. 

Repeat on other side of oven door.

3. Close the oven door as far as it will shut.
4. Lift the oven door while holding both sides.

Continue to push the oven door closed and pull it away from 
the oven door frame.

1. Insert both hanger arms into the door.

2. Open the oven door.

You should hear a “click” as the door is set into place.

3. Move the hinge levers back to the locked position. Check 

that the door is free to open and close. If it is not, repeat the 
removal and installation procedures.

A

B

A

A

A