Frigidaire FRS184YS2 Manual Do Proprietário

Remote control

31

2.  The indoor unit does not respond 

to the remote control commands to 
activate the programs.

1.  Slide out the battery 

control).

the compartment (indicated in the 
drawing located inside the 
compartment).

3.  Slide in the cover.

4.  If the remote control is not 

operated for long period of times, 
batteries should be discarded. 

1.  The signal reach distance of the 

remote control to the receiver that 

obstruction placed between the 
receiver and the remote control 
can cause interference, limiting 
the capacity of the programming.

conditioner emits a 

"beep" that 

indicates that a command has 

the indoor unit.

1.  When replacing batteries, do not 

use old batteries or a different 
type battery. This may cause the 
remote control to malfunction.

2.  If you do not use the remote 

remove the batteries. Otherwise 
battery leakage may damage the 
remote controller.

3.  The average battery life under 

normal use is about 6 months.

4.  Replace the batteries when there 

is no answering beep from the 

3.  When selecting the function of 

timer, the remote control sends 
(automatically) a signal to the indoor 

that the signal is blocked, a 15 
minute delay can be produced.

Attention

1.  There is not a

 "beep" anymore

compartment cover ( located at 
the back of the remote 

2.  Install two AAA batteries in 

is inside the indoor unit of the air 
conditioner is 

32.8

 ft. Any 

2.  Any time when a button is pressed 

on the remote control, the air 

been received and transmitted to 

remote control is left in a position 

unit at the specific period.  If the 

controller for several weeks, 

indoor unit or if the transmission 

from the indoor unit when using 
the control remote or the signal
light indicator does not light. 

indicator fails to light.