Thermador PRD484NCHU Instrução De Instalação

English 7

   

 

as defined in the “National Fuel Gas Code” (ANSI Z223.1, Current Edition). 

Clearances from non-combustible materials are not part of the ANSI Z21.1 
scope and are not certified by CSA. Clearances of less than 12” (305 mm) 
must be approved by the local codes and/or by the local authority having jurisdiction.

Combustible 
Materials

28” (711 mm)

27¼” (692 mm)

36" (914  mm)  min .   
to combustible  
materials

   

24” (610 mm) 

max. recess depth

Cantilever

36¾” (933 mm) Max.

35⅞” (911 mm) Min.

23” (584 mm)

44⅞” (1140 mm)
Total Clearance

24⅝” (625 mm)

24¾” (629 mm)

If an inner wall
is used under
the cantilever counter
top, there should be a
⅛” (3 mm) gap from 
the rear of the range
to the inner wall.

12” (305 mm) min. to 
combustible surface
with Flush Island Trim

12” (305 mm) min. to 
combustible surface
with Flush Island Trim

12” (305 mm) min. to 
combustible surface
with Flush Island Trim

For Flush Island

For Flush Island

For Flush Island

Trim installations,

Trim installations,

Trim installations,

counter surface should

counter surface should

counter surface should

have a cantilever edge

have a cantilever edge

have a cantilever edge

meeting the back 

meeting the back 

meeting the back 

section of the Flush

section of the Flush

section of the Flush

Island Trim accessory.

Island Trim accessory.

Island Trim accessory.

Shaded area behind
range indicates
minimum clearance
to combustible surfaces,
combustible materials
cannot be located within
this area.

Shaded area behind
range indicates
minimum clearance
to combustible surfaces,
combustible materials
cannot be located within
this area.

Shaded area behind
range indicates
minimum clearance
to combustible surfaces,
combustible materials
cannot be located within
this area.