Monogram ZEU36RSJSS Instrução De Instalação

A   When preparing cooktop opening, make sure 

the inside of the cabinet and the cooktop do 

not interfere with each other. (See section on 

preparing the opening.)

B   Remove packaging materials and literature 

package from the cooktop before beginning 

installation.

C   Be sure to place all literature, Owner’s Manual, 

Installations, etc. in a safe place for future 

reference.

D   Make sure you have all the tools and materials 

you need before starting the installation of the 

cooktop.

E   Your home must provide the adequate 

electrical service needed to safely and 

properly use your cooktop. (Refer to section on 

electrical requirements.)

F   When installing your cooktop in your home, 

make sure all local codes and ordinances are 

followed exactly as stated.

G   Make sure the wall coverings, countertop and 

cabinets around the cooktop can withstand 

heat (up to 200°F) generated by the cooktop.

H   Installing cooktop in combination with other 

products. Both products must be installed 

according to their specific product installation 

instructions. Consideration must be given the 

separate electrical requirements and locations:

 

Over one or two wall ovens:

 

•   Only certain models may be installed over 

wall ovens. The wall oven and cooktop will 

both have a label stating which models are 

approved in combination.

 

Over a Microwave:  

 

•   See microwave installation instructions 

for how to install a microwave under a 

cooktop. For vertical dimension of cooktop, 

see Approximate Cooktop Dimensions 

section.

 

In combination with telescopic downdraft vent:

 

•   See telescopic downdraft vent instructions 

for how to install a vent behind a cooktop.

 

•   The countertop must have a deep flat 

surface to accommodate the combined 

installation of the cooktop and vent.

 

Over a warming drawer:  

 

•   See warming drawer instructions for how to 

install a warming drawer under a cooktop.  

For vertical dimension of cooktop, see 

Approximate Cooktop Dimensions section.

Cooktop

Literature Package 

(Located under unit)

Foam 

Packaging

  The following MINIMUM clearance dimensions 

must be maintained.

13" MAX. Depth of unprotected 

overhead cabinets

30" MIN. 

Clearance from 

countertop to 

unprotected 

overhead 

surface

2" MIN. Clearance from 

cutout to side wall on the 

left of the unit

15" MIN. Height 

from countertop to 

nearest cabinet on 

either side of unit

2" MIN. Clearance 

from cutout to 

side wall on the 

right of the unit

If a 30" clearance between the cooking surface and 

overhead combustible materials or metal cabinets 

cannot be maintained, a minimum clearance of 24" 

is required and the underside of the cabinets above 

the cooktop must be protected with not less than 

1/4" insulating millboard covered with sheet metal 

not less than 0.0122" thick.