Dacor RNRP48GSNG Utilização E Cuidado

Página de 28
7
Installing the Oven Racks
 WARNING
The oven racks become hot when the oven is in use.
The rack supports provide seven heights for posi-
tioning of the oven racks.
Standard Oven Rack 
To install a standard oven rack:
1.  Insert the end of the rack with the safety notches 
into the oven first.
2.  Attach both sides of the rack to the rack supports 
in the oven as shown below.
3.  Begin to slide the rack in, and then, lift up so 
that the safety notches clear the ends of the rack 
supports.
4.  Push the rack all the way in with both hands.
To remove a standard oven rack:
1.  Grasp it with both hands and pull gently straight 
out toward you until it stops.
2.  To remove the rack completely, lift the front of 
the rack up about six inches and continue to 
pull it out. Lifting the rack releases the safety 
notches. The safety notches reduce the chances 
of a rack coming out of the oven accidentally.
GlideRack Oven Racks
Your oven comes with Dacor GlideRack oven racks. 
When you use them, you can effortlessly slide heavy 
pots, pans or other items out to check, stir or add 
ingredients quickly and safely.
To insert a GlideRack oven rack:
1.  Extend the rack guides completely as shown below.
2.  Align both sets of safety clips (right and left) on the 
back of the rack guides with the oven rack supports 
as shown.
3.  Insert the rack into the oven, sliding the rack sup-
ports between the rear safety clips as shown. As 
you slide the rack in, hold the front of the rack up 
slightly until the front safety clips just clear the 
front of the rack supports.
4.  Lower the front of the rack so that the front of the 
rack support is between the front safety clip and 
the rack stop.
5.  Grasp the rack in the center of the front and pull. 
The rack should come forward while the guides 
remain in place.
To remove a GlideRack oven rack:
•  Grasp the rack with both hands and pull it gently 
straight out toward you until it stops.
•  Lift up until the front safety clips just clear the 
front of the oven rack supports. Continue to pull 
out. Moving the end of the rack slightly, left to 
right, as you pull, will make it easier to remove.
Setting Up Your Range
Standard Oven Rack Installation
Front of rack
Front of 
rack
Rack guides 
(fully extended)
Lift front safety 
clips over rack 
supports
Slide rack supports 
between back safety clips
Rack support 
(inside oven)
Back of 
guide
Back of rack
Rack 
support
Slide oven rack 
supports into 
slots on the rack
Safety notch
GlideRack Oven Rack Installation