Dacor ER30DSR Utilização E Cuidado

25

Care and Cleaning

•  Do not clean the cooktop grates, burner parts or WOK ring 

in a dishwasher. They will be damaged.

•  Dry and re-assemble the burners and grates completely 

before use.

•  When the cooktop is cool, remove the grates from the 

top of the cooktop.

•  Lift the burner caps and burner rings off of the burn-

ers. Remove the burner head from the crown burner.

•  The grates, spill tray and WOK ring are coated with 

a porcelain finish. For everyday cleaning, use a soft 

cloth or non-abrasive pad with warm soapy water to 

clean all of the porcelain parts.

•  If necessary, tough stains may be removed by apply-

ing full strength sprays such as Simple Green, Ajax 

All-Purpose Cleaner or Formula 409. To minimize 

wear, use the mildest cleaner needed to get the sur-

face clean.

•  For extremely stubborn stains, you may use a mildly 

abrasive cleaner or applicator, such as Soft Scrub, Bon 

Ami, S.O.S. pads or other soap-filled steel wool pads. 

on occasion. Aggressive or extensive use of these 

types of abrasives will damage the finish. Finish 

Use care while cleaning the igniters. The porcelain is fragile 

and can crack or break.

IMPORTANT: The igniter(s) will not work properly if the 

burner cap, burner ring, burner base or the igniter itself 

are not clean. Dirty or wet igniters may not spark at all.
1.  After disassembling the burners, check for any dirt or 

grime deposited on the individual parts, including the 

igniters.

2.  Use a firm tooth brush to gently clean completely 

around the igniter, including all of the metal top and 

porcelain base. Do not use water to clean the igniters. 

If necessary, use a small amount of rubbing alcohol to 

help dissolve grime.

3.  Examine the burner rings. Remove anything stuck 

in the holes with a straightened paper clip, wire or 

needle. Be careful not to scratch or damage the ring 

and cap. Do not distort the shape of the burner ring 

holes.

4.  Clean all the burner parts, including the burner bases, 

with window cleaner or rubbing alcohol. Use a clean-

ing brush with plastic bristles or a firm tooth brush. 

When done, rinse the parts well with clean water. Dry 

all the parts thoroughly before reassembling them.

Burner 

cap

Burner 

cap

Burner 

ring

Burner 

ring

Burner 

head

Burner 

base

Burner 

base

Igniter

Igniter

5.  Reassemble the cooktop according to the burner and 

grate assembly instructions starting on page 7. 

Test the burners after reassembling them. If the flame 

is uneven, be sure that the brass burner ring and por-

celain burner cap are properly positioned, then check 

for any remaining dirt or grime on the burner parts 

or igniter. If erratic clicking is still present, make sure 

the igniter is completely dry. If the unit still exhibits 

problems after drying, call your local Dacor Authorized 

Service Agent.