Dacor DYRP48DSNGH Utilização E Cuidado

18

Basic Oven Operation

Oven Racks

Back of rack

Front of rack

Safety 

notch

Slide oven rack 

supports into slots 

on the rack

Rack 

support

Back of 

guide

Oven rack 

support

Rack 

guides

Front of 

rack

Slide oven rack supports 

between back safety clips

Lift front safety 

clips over rack 

supports

You may use either rack type on any level inside the oven.

To reduce the chance of burns, position the oven racks when the 

oven is cool. If you must reposition a rack when the oven is hot, 

use pot holders.

To insert a standard oven rack...

1.  Insert the end of the rack with the safety notches into 

the oven first.

2.  Attach both sides of the rack to the rack supports in 

the oven as shown in the diagram below.

3.  Begin to slide the rack in, and then, lift up so that the 

safety notches clear the ends of the rack supports.

4.  Push the rack all the way in with both hands.

To remove a standard oven rack...

•  Grasp it with both hands and pull gently straight out 

toward you until it stops.

•  To remove the rack completely, lift the front of the 

rack up about six inches and continue to pull it out. 

Lifting the rack releases the safety notches. The 

safety notches reduce the chances of a rack coming 

out of the oven accidentally.

To insert a GlideRack oven rack...

Your oven also comes with Dacor GlideRack oven racks. 

You can pull a GlideRack oven rack out further than a 

standard rack and still support heavy pots and pans full of 

food. It is great for heavier foods and the optional Dacor 

baking stone.
1.  Align both sets of safety clips (right and left) on the 

back of the rack guides with the oven rack supports as 

shown below. NOTE: The diagram below shows instal-

lation with the rack guides extended but, the rack 

may be installed with or without the guides extended, 

whichever is easier.

2.  Begin to slide the rack in, lifting the front safety clips 

over the front of the oven rack supports.

3.  Push the rack all the way in.
4.  Grasp the rack in the center of the front and pull. The 

rack should come forward while the guides remain in 

place.

To remove a GlideRack oven rack...

•  Grasp the rack with both hands and pull it gently 

straight out toward you until it stops. 

•  Lift up until the front safety clips just clear the front 

of the rack supports on the oven. Continue to pull out. 

Moving the end of the rack back and forth slightly, left 

to right, as you pull, will make it easier to remove.