Moen T6193 Ficha De Dados Do Produto
DESCRIPTION
• Hydrolock™ quick connect system
•
•
Metal construction with various finishes identified by suffix
•
1/2" IPS connections
OPERATION
•
Lever style handles
•
Maximum handle rotation angle is 90˚ to full on for either handle
•
Hot side counterclockwise to open (clockwise to close)
•
Cold side clockwise to open (counterclockwise to close)
•
Includes hot and cold temperature indicators
FLOW
•
Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi, for products made
before October 2008 flow is limited to 2.2 gpm max (8.3 L/min)
before October 2008 flow is limited to 2.2 gpm max (8.3 L/min)
CARTRIDGE
•
1224 cartridge design
•
Nonmetallic, nonferrous and stainless steel material
STANDARDS
•
Third party certified to WaterSense,® CSA B125.1, ASME A112.18.1, and
all applicable requirements referenced therein including NSF61/9
all applicable requirements referenced therein including NSF61/9
•
Certified to ANSI/NSF 61/9
•
Contains no more than 0.25% weighted average lead content
•
Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
Drinking Water Act
• ADA
for lever handles
WARRANTY
•
Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
to the original consumer purchaser
•
5 year warranty if used in commercial installations
ALIGN™
Two Handle Widespread
Lavatory Faucet Trim
Models: T6193 series
Valve: 9000, 69000
NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED
THRU 3 HOLES, 1-1/8" MIN. DIA.
NOTE: FOR DECK THICKNESS 1-1/2" to 3", USE SERVICE KIT
#115001. VALVES INSTALL THROUGH 1-1/4" DIA. HOLE.
5-9/16"
(140mm)
2-61/64"
(75mm)
5-9/16"
(140mm)
4-13/16"
(122mm)
4-17/64"
(108mm)
10°
2-37/64"
(65mm)
6-13/32"
(163mm)
1-29/32"
(48mm)
1/4"
(6mm)
1-9/16"
(40mm)
2"
(51mm)
CRITICAL DIMENSIONS
(DO NOT SCALE)
S p e c i f i c a t i o n s
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Rev. 10/13