Vigo Industries VG15348 Ficha De Características

6.  Loosely attach mounting brackets to the countertop, parallel to

     the cutout opening using the supplied mounting screws and
     nuts. Mounting screws with brass inserts are supplied with the
     sink, however, countertop material vary and the correct type of
     fasteners should be recommended by your installer or supplier.

7.  Clean sink flange and underside of cutout area of countertop,

     making sure that the area is smooth and free of grease. MUST
     use 100% silicone for this installation.  Apply continuous bead
     of silicone caulk evenly on top of sink flange. (FIGURE 4)
     NEVER perform this procedure outdoor and under sunlight.
     If performed under an extremely hot and dry climate, the
     caulking of the sink frame should be performed by two
     people at the same time.

8.  Position and align sink over the countertop opening and press

     sink onto countertop. Turn bent end of mounting bracket to
     snug over the sink rim.

9.  Check alignment of sink again and tighten fasteners to secure

     sink.  (FIGURE 5)

10. Wipe away excess silicone caulk with damp cloth. Connect

     drain and water supply according to manufacturer's instruction.

4