Dacor DTO230S Instrução De Instalação

Installation Instructions

Installing the Oven in the Cabinet

•  Failure to properly install the mounting screws may 

result in movement or tipping of the oven during use, 

resulting in personal injury.

•  Do not block the oven air exhaust located at the bot-

tom of the oven. Blocking the intake may result in a 

fire hazard, cabinet damage or poor performance.

•  The wall oven is heavy. Do not attempt to install it in 

the cabinet with less than two people.

•  Do not use the exhaust grill or the bottom edge of 

the oven opening as a gripping point. Damage to the 

exhaust grill may result.

1.  Lift the wall oven up to the cabinet cutout, using the 

upper edge of the cavity opening and the bottom of the 

oven case side as gripping points. Be certain to take all 

necessary safety precautions due to the weight of the 

appliance.

2.  Resting the oven on the cabinet-mounting platform, 

slide the oven into the recessed area until the rear 

edge of the oven frame is flush with the cabinet face 

and the oven is centered within the cutout. Ensure that 

the electrical conduit slides through the opening in the 

cabinet platform or coils above the oven chassis as the 

oven is slid into place. The cable must be placed into 

the recessed area located along the rear vertical edge 

of the oven or coiled above the oven chassis. Do not 

trap the appliance cable between the oven case back 

and the rear wall.

3.  Locate the mounting holes in the trim on both sides 

of the oven. There are four (4) holes, two (2) on each 

side, for single oven models and six (6) holes for dou-

ble oven models.

4.  Use a 1/16” drill bit to drill pilot holes in the cabinet 

through all of the trim mounting holes.

5.  Install all of the provided #6 screws through the oven 

trim into the cabinet to secure the oven. Do not over-

tighten.

Four (4) for single oven

Six (6) for double oven

Gripping 

point

Gripping point:  

case bottom 

both sides

Do not

grip here!