Vinotemp VT32SBID Manual Do Proprietário
11
1 7 6 2 1 S o u t h S u s a n a R o a d , R a n c h o D o m i n g u e z , C a l i f o r n i a 9 0 2 2 1
i n f o @ v i n o t e m p . c o m
REVERSAL OF DOOR SWING
This wine cooler is built with a reversible door. You have the choice of either opening it from the left or
the right side. In order to reverse the direction in which your door opens, please follow these simple
instructions.
CAUTION: To avoid personal injury to yourself and/or property, we recommend that someone
assist you during the door reversal process.
IMPORTANT: Empty the wine cooler and secure any loose parts (shelves) before reversing the
door.
door.
1. Remove the plug on top of the left side of the cabinet and
set it aside for later use.
2. Unscrew the door handle and set it aside for later use.
3. Remove the hinge cover on top of the right side of the
3. Remove the hinge cover on top of the right side of the
cabinet and keep it for later use.
4. Unscrew the door hinge on top of the right side of the door
and keep it for later use.
5. Remove the plug on the top left-hand side of the cabinet
and install it on the top right-hand side of the cabinet.
6. Install the door hinge and hinge cover to the top left side of
the cabinet.
7. Remove the door support located on the bottom right-hand
side of the cabinet and install it on the bottom left-hand side
of the cabinet.
of the cabinet.
8. Install the door handle on the right side of the door.
Note:
1. It is recommended that you change the door swing before
installation.
2. In order to allow the coolant to settle inside the compressor,
you must refrain from plugging in the unit for 48 hours after
the cabinet has been out of an upright position.
the cabinet has been out of an upright position.