Verona VEFSGE365NDW Instrução De Instalação

IMPORTANT - PLEASE READ AND FOLLOW

✓

Before beginning, please read these instructions completely and carefully.

✓

Do not remove permanently affixed labels, warnings, or plates from the product. This

may void the warranty.

✓

Please observe all local and national codes and ordinances.

✓

Please ensure that this product is properly grounded.

✓

The installer should leave these instructions with the consumer who should retain

for local inspector's use and for future reference.

Installation must conform with local codes or in the absence of codes, the National Fuel

Gas Code ANSIZ223.1 - Iatest edition. Electrical installation must be in accordance

with the National Electrical Code, ANSI/NFPA70 - latest edition and/or local codes. IN

CANADA: Installation must be in accordance with the current CAN/CGA-B149.1 National

Gas Installation Code or CAN/CGA-B149.2, Propane Installation Code and/or local codes.

Electrical installation must be in accordance with the current CSA C22.1 Canadian Electrical

Codes Part 1 and/or local codes.
INSTALLATION IN MANUFACTURED (MOBILE) HOME: The installation must conform

with the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280

[formerly the Federal Standard for Mobile Home Construction and Safety, Title 24, HUD

(Part 280)] or, when such standard is not applicable, the Standard for Manufactured Home

Installations, ANSI/NCSBCS A225.1, or with local codes where applicable.
INSTALLATION IN RECREATIONAL PARK TRAILERS: The installation must conform with

state or other codes or, in the absence of such codes, with the Standard for Recreational

Park Trailers, ANSI A119.5.
Installation of any gas-fired equipment should be made by a Iicensed plumber. A manual

shut-off valve must be installed in an accessible location in the gas line external to the appli-

ance for the purpose of turning on or shutting off gas to the appliance (In Massachusetts

such shutoff devices should be approved by the Board of State Examiners of Plumbers &

Gas Fitters).
If an external electrical source is utilized, the appliance, when installed, must be electri-

cally grounded in accordance with local codes or, in the absence of local codes, with the

national Electrical Code, ANSI/NFPA 70.

This range is supplied with a protective film on

steel and aluminium parts.

This film must be removed before installing/using the appliance.

FOR INSTALLER ONLY

THIS RANGE IS FOR RESIDENTIAL USE ONLY

• INSTALLATION INSTRUCTIONS

IMPORTANT - PLEASE READ AND FOLLOW

DOUBLE OVEN DUAL FUEL RANGE

for residential use only

Model:

VEFSGE 365 D..