Faber TRAT36SS Ficha De Características
Dimensional Diagrams
Ductless
For ducted installations, the
chimneys can be adjusted
for ceilings between 7’ 4
3/8” and 8’ 9 3/8” depend-
ing on the distance between
the bottom of the hood and
the cooktop (distance x in
Ducted diagram).
chimneys can be adjusted
for ceilings between 7’ 4
3/8” and 8’ 9 3/8” depend-
ing on the distance between
the bottom of the hood and
the cooktop (distance x in
Ducted diagram).
For ductless installations,
the chimneys can be adjust-
ed for ceilings between 7’ 9
1/4” and 8’ 9 3/8” depend-
ing on the distance between
the bottom of the hood and
the cooktop (distance x in
Ductless diagram).
the chimneys can be adjust-
ed for ceilings between 7’ 9
1/4” and 8’ 9 3/8” depend-
ing on the distance between
the bottom of the hood and
the cooktop (distance x in
Ductless diagram).
For shorter ceilings, have
the chimney cover(s) cut at
a sheet metal shop. For
higher ceiling installations,
the High Ceiling Chimney
Kit includes a new 40” up-
per chimney which would
replace the 16 1/8” upper
chimney that came with the
hood.
the chimney cover(s) cut at
a sheet metal shop. For
higher ceiling installations,
the High Ceiling Chimney
Kit includes a new 40” up-
per chimney which would
replace the 16 1/8” upper
chimney that came with the
hood.
Ducted
Ductless
Ducted
upper
chimney
cover
lower
chimney
cover
canopy
x = distance from hood to cooktop
(varies depending on installation)
min - 24”, suggested max - 30”
cabinet base
5
1/8”
min
16
1/8”
max
21
1/4”
2"
36”
19
3/8"
x
also consult cooktop
manufacturer's recommendation
min & max ceiling height examples
x = 30"
min
7'
10 3/8"
max
8'
9 3/8"
x = 28"
min
7'
8 3/8"
max
8'
7 3/8"
x = 26"
min
7'
6 3/8"
max
8'
5 3/8"
x = 24"
min
7'
4 3/8"
max
8'
3 3/8"
upper
chimney
cover
ductless
lower
chimney
cover
canopy
x = distance from hood to cooktop
(varies depending on installation)
min - 24”, suggested max - 30”
cabinet base
10" min
16
1/8”
max
21
1/4"
2"
36”
19
3/8"
x
also consult cooktop
manufacturer's recommendation
min & max ceiling height examples
x = 30"
min
8'
3 1/4"
max
8'
9 3/8"
x = 28"
min
8'
1 1/4"
max
8'
7 3/8"
x = 26"
min
7'
11 1/4"
max
8'
5 3/8"
x = 24"
min
7'
9 1/4"
max
8'
3 3/8"
* it is highly recommended that
professional style cooking al-
ways be vented to the outside.
professional style cooking al-
ways be vented to the outside.
WARNING!
Product specifications are subject to change without notification. Consult the installation instructions before you begin installing this rangehood.
Ductless Installations*
For installations where duct-
work is impossible or highly
impractical, a Ductless
Conversion Kit is available.
A charcoal filter, which at-
taches under the blower as-
sembly, absorbs smoke and
odors. A ductless diverter
assembly directs the air out
to a lower chimney with vent
grates cut into the sides.
work is impossible or highly
impractical, a Ductless
Conversion Kit is available.
A charcoal filter, which at-
taches under the blower as-
sembly, absorbs smoke and
odors. A ductless diverter
assembly directs the air out
to a lower chimney with vent
grates cut into the sides.
Make your ductrun as straight and short as possible. The ductrun should not ex-
ceed 35 equivalent feet if ducted with the required minimum of 6” round duct.
Count 45º angles as 3 feet, 90º elbows as 5 feet, and 90º flat elbows as 12 feet.
ceed 35 equivalent feet if ducted with the required minimum of 6” round duct.
Count 45º angles as 3 feet, 90º elbows as 5 feet, and 90º flat elbows as 12 feet.
For best results, use no more than three 90° elbows. Make sure that there is
a minimum of 24” of straight duct between elbows if more than one is used.
Do not install two elbows together. If you must elbow right away, do it as
far away from the hood’s exhaust opening as possible.
a minimum of 24” of straight duct between elbows if more than one is used.
Do not install two elbows together. If you must elbow right away, do it as
far away from the hood’s exhaust opening as possible.
Pre-Planning Your Installation -
Important: Consult the installation instructions before you begin installing this rangehood.
Pre-Planning Your Installation -
Important: Consult the installation
instructions before you begin installing this rangehood.
Rev. 07/11
10 7/16”
11 13/16”