Broan 523001 Guia Da Instalação

2

FILTER

RETAINER

TABS

FILTER

The fan and light are each controlled

by a rocker switch. The light switch has

two positions, “ON” and “OFF”. The fan

switch has three positions - “HIGH”,

“LOW” and “OFF”.  ( “OFF” is the middle

position.)

SCREWS

Remove filter. Re-

move two screws

holding motor bracket

to range hood, and

unplug fan assembly.

Be careful not to allow

fan assembly to drop

when screws are re-

moved.

Remove aluminum fil-

ter by turning filter re-

tainer to one side. Fil-

ter should be washed

once a month in a hot

detergent solution.

Aluminum filters are

dishwasher safe.

When installing filter,

make sure that filter

slides under retaining

tabs on back of fan

housing. Turn filter re-

tainer so that arrows

on retainer point to-

ward front and back of

hood.

Clean your hood with a mild detergent suitable for painted

surfaces. DO NOT USE ABRASIVE CLOTH, STEEL

WOOL PADS OR SCOURING POWDERS.
Fan assembly may be vacuumed. Fan assembly is per-

manently lubricated, and never needs oiling.