Thermador SGS305FS Instrução De Instalação

English 8

Final Check

Check operation of electric igniters. Check flame 
characteristics. Flame should be blue with no yellow tip.

If the ignitors do not spark or the “on” indicator lights do not 
glow, check the power source to see if a fuse has blown or 
if the circuit breaker has tripped.

Refer to the Warranty in the Use and Care Manual. See 
Use and Care manual for troubleshooting information.

Product Data Plate

The data plate shows the model and FD (product's unique 
identifier for customer service) number  of your cooktop. It 
is located on the underside of the rough-in box, underneath 
the cooktop.

Keep your invoice or escrow papers for warranty validation 
if service is needed.

Yellow Flames:
Further adjustment is required. 

Yellow Tips on Outer Cones:
Normal for LP Gas.

Soft Blue Flames:
Normal for Natural Gas.

If the flame is completely or 
mostly yellow, verify that the regulator is set for the 
correct fuel. After adjustment, retest.

Some yellow streaking is normal during the initial start-
up. Allow unit to operate 4-5 minutes and re-evaluate 
before making adjustments.

Data Plate