Monogram ZV800SJSS Instrução De Instalação

• Drive 2 screws into each side bracket. 

Be sure the screws engage the filler blocks 
or the cabinet bottom.

• Pull the glass canopy forward to access and install 

2 screws through the hood and into the brackets on
both sides.

• Use duct tape to secure the duct to the exhaust

outlet in the top of the hood. Do not use screws 
at this location.

If there is a noticeable gap between the hood and the
bottom of the cabinet on the sides:
• Slide canopy forward and install original top screws

through the bottom of the hood and into cabinet
bottom or frame.

NOTE: Install wood filler blocks if necessary to
accept the screws.

Install 2 Screws into

Each Side Bracket

• Carefully, lift the hood into the cabinet. Guide the

hood upwards to meet the ductwork.

IMPORTANT: One person must hold the hood in place
while the other drives the screws into the mounting
frame.

Install original top screws

Install a wood screw

on each side of the

mounting frame