Monogram ZET2PMSS Ficha De Características

Página de 2
Dimensions and Installation Information (in inches)
Installation Flexibility 
These ovens may be installed in combination with a Monogram 
warming drawer. 
Note: Cabinets installed adjacent to wall ovens must have an  
adhesion spec of at least a 194°F temperature rating.
Installation Information: Before installing, consult installation  
instructions packed with product for current dimensional data.
For answers to your Monogram,
® 
GE Profile
 or  
GE
®
 appliance questions, visit our website at 
geappliances.com or call GE Answer Center
®
 
service, 800.626.2000.
Specification Revised 8/12
130183
ZET2PM 
GE Monogram
®
 30” Built-In Double Oven
 
KW Rating
240V
8.6
208V
7.8
Breaker Size
240V
40 Amps
208V
40 Amps
Listed by 
Underwriters 
Laboratories
28-1/2" Min.
        28-5/8" Max.
51-13/16"
Min.
51-15/16"
Max.
12"
Locate Junction Box 47"
Above Cutout Floor, Within 5"
of Right Rear Wall
30"
52-7/8"
23-1/4"
Recessed
Depth
29-3/4"
23-1/2"
Min.
28-1/2" Min.
        28-5/8" Max.
51-13/16"
Min.
51-15/16"
Max.
12"
Locate Junction Box 47"
Above Cutout Floor, Within 5"
of Right Rear Wall
30"
52-7/8"
23-1/4"
Recessed
Depth
29-3/4"
23-1/2"
Min.
The solid bottom or runners must be level with the bottom of the 
cutout, or the bottom trim may not install correctly and could 
interfere with the door opening. If the cabinet does not have a 
solid bottom, two braces or runners must be installed level with 
the bottom of the cutout to support the weight of the oven. The 
runners and braces must support 375lbs. (90 kg).
NOTE: Install the
oven only with
specific models
listed on the label
located on top of
the oven.
Anti-Tip Block
Against Rear
Wall Per
Warming
Drawer
Requirement
2   (5.1 cm)
Min.
1   (2.5 cm) Min. Above Toekick
Per Warming
Drawer
Requirement
Overlap Dimensions
Left
Right
Top
Bottom
9/16
9/16
5/16
9/16