Summit SP6DS2D7ADA Instrução De Instalação
Step 1
1) Remove both drawers from unit by opening drawers
and pushing in black tabs on either side of the slides.
You must hold in tabs to disengage slide.
2) Peel back gasket (Fig A) and remove 2 screws to
remove handle.
3) Throw out the 2 screws that attach the handle.
and pushing in black tabs on either side of the slides.
You must hold in tabs to disengage slide.
2) Peel back gasket (Fig A) and remove 2 screws to
remove handle.
3) Throw out the 2 screws that attach the handle.
Step 2
1) Drill the bottom 2 holes shown in the drawing
using the supplied drill bit on the drawer front.
2) Cut overlay panels as follows:
Top: 23-7/16 x 15-11/16
Bottom: 23-7/16 x 12- 9/16
using the supplied drill bit on the drawer front.
2) Cut overlay panels as follows:
Top: 23-7/16 x 15-11/16
Bottom: 23-7/16 x 12- 9/16
1 of 2
Q119
05/23/11
Q119
05/23/11
Directions for Applying Overlay Panel
Materials Supplied:
1 - Drill Bit 3/16"
4 - Screws M4 x 25 Flat Hd Phillips (For Handle)
8 - Screws #10 x 1.75 Type AB Phillips
1 - Drill Bit 3/16"
4 - Screws M4 x 25 Flat Hd Phillips (For Handle)
8 - Screws #10 x 1.75 Type AB Phillips
Gasket
Handle
2 3/4
11/16
2 3/4