Perlick HP24TS31L1A Utilização E Cuidado
7
perlick.com
PERLICK RESIDENTIAL INSTALLATION MANUAL
LED Functions
The following table describes LED Funtions
The following table describes LED Funtions
Defrost LED
Permanently on: defrost active
Flashing: manual defrost active
Off: otherwise
Permanently on: defrost active
Flashing: manual defrost active
Off: otherwise
Alarm LED
Permanently on: alarm active
Flashing: alarm acknowledged
Off: otherwise
Permanently on: alarm active
Flashing: alarm acknowledged
Off: otherwise
Evaporator LED
Permanently on: fans active
Off: otherwise
Permanently on: fans active
Off: otherwise
Compressor LED
Permanently on: compressor active
Flashing: a delay, a protection or a
locked start-up
Off: otherwise
Permanently on: compressor active
Flashing: a delay, a protection or a
locked start-up
Off: otherwise
Aux LED
Permanently on: Aux output
active
Off: otherwise
Permanently on: Aux output
active
Off: otherwise
°C LED
Permanently on: display the
temperature
Off: otherwise
Permanently on: display the
temperature
Off: otherwise
NOTE: When switched on, the device performs a Lamp Test; the
display and LEDs will flash for several seconds to check that they all
function correctly.
display and LEDs will flash for several seconds to check that they all
function correctly.
C-Series Models
Model
Temp Range
HC24R
33° - 42° F
HA24BB
33° - 48° F
HA24WB
45° - 65° F
DIAL TEMPERATURE CONTROL
ADA-Compliant Models
(Excludes ADA Freezer - HA24F models use digital controller
found on page 5)
(Excludes ADA Freezer - HA24F models use digital controller
found on page 5)
C
O
O
LE
R
OFF
1
2
3
4
5
6
COLD
Figure 3. Dial Temperature Controller
Use a straight slot screwdriver to adjust the dial
temperature control. The control is located at the top rear
panel of the cabinet. Approximate temperature ranges are
as follows:
temperature control. The control is located at the top rear
panel of the cabinet. Approximate temperature ranges are
as follows:
ADA-Compliant Series
Model
Temp Range
HA24RB
33° - 42° F
HA24BB
35° - 48° F
HA24WB
45° - 65° F
Adjust the temperature as follows:
Colder Temperature:
Turn the adjusting screw clockwise (to the right).
Turn the adjusting screw clockwise (to the right).
Warmer Temperature:
Turn the adjusting screw counterclockwise (to the left).
Turn the adjusting screw counterclockwise (to the left).
Temperature Control OFF:
Turn the adjusting screw completely counterclockwise to
the OFF position until a click is heard.
Turn the adjusting screw completely counterclockwise to
the OFF position until a click is heard.
NOTE: The condenser fan motor turns off with the compressor.