GE JNM3163RJSS Instrução De Instalação

    Place the blower unit back into the opening.  

  Roll the blower unit 90° so that fan blade 

openings are facing out the back of the 

oven.

1  Remove the two screws that hold the blower plate 

and remove the screw holding the blower motor to 

the oven. Slide blower plate from under its retaining 

flange.

 

  Carefully pull out the blower unit. The wires  

will extend far enough to allow you to adjust  

the blower unit.

Blower Plate

Blower Plate

     Replace the blower plate in the same position 

as before and replace the screws for the 

blower plate and blower motor.

Before Rolling

After Rolling

Back of 

Oven

Back of 

Oven

Back of 

Oven

Retaining 

Flange

Blower Plate Screws

Back of 

Oven

3  Rotate blower unit counterclockwise 180°.

Before Rotation

After Rotation

Back of 

Oven

Back of 

Oven

Blower Motor Screw