Heartland HCFDR23BLK Manual Do Proprietário

14

A red indicator light will be illuminated above most active features.

Touch the icon to activate the options below.

    Activates a faster rate for freezing food. 

    Increases the production of ice

energy saver      Keep this switch set on energy saver (light on) for lowest energy us   

 

 

    age. If moisture appears on the cabinet between the doors, pressing    

 

     

    this button will turn the light off and enable an electric heater used to    

 

 

    reduce moisture on the cabinet between the doors.

    Press and hold for three seconds to reset after filter change.

    Filter condition status is always displayed when door is open. Press    

 

 

    and hold for three seconds to reset after filter change.

    Touch to toggle display from Fahrenheit to Celsius.

mute sounds      Tones emitted by each key press can be turned off based on user  

 

 

     

    preference. The sounds are muted when the red indicator is lit. Warn-   

 

 

    ing signals will stay active.

default settings   Resets all refrigerator settings such as temp, temp display and tones    

 

 

    to their factory default settings.

    Press and hold for three seconds to turn off the cooling system to  

 

 

 

    clean the refrigerator. It also turns off the ice maker. The temperature    

 

 

    displays will read OFF.

Pressing the system on/off icon does not 

turn off power to your refrigerator. You must 

unplug the power cord from the wall outlet.

Press the + or – indicator to adjust the temperature to the desired setting.

The temperature display will begin to blink with the first touch. The display will time out 

after 10 seconds and return to the basic display.

If the door has been left open for an extended period of time, an alarm  

 

 

will sound and the door ajar indicator will display on the bottom display  

 

 

of the control panel. The alarm is turned off by closing the door. The  

 

 

mute sounds key will blink to prompt the reset of any active alarms.  

 

 

Press this key to reset any system alarms.

In the event of a high temperature condition, the temperature display  

 

 

will blink and display “HI”. After 20 minutes, the alarm will sound and 

  the 

high temp indicator will be red on the bottom of the control panel.  

  The 

mute sounds icon will illuminate until pressed, acknowledging the  

 

 

alarm, at which time the highest temperature reached will be displayed  

 

 

and the refrigerator will resume normal operation. In case the high temp  

 

 

alarm is not acknowledged at the first alarm sound time out, when the  

 

 

door is first opened, the alarm sound will be repeated.

In the event of a power failure, the 

power fail alert will be displayed and  

 

 

the temperature display will blink until the 

mute sounds icon is pressed,  

 

 

acknowledging the alarm. Other modes may be turned off until the alarm  

  is 

acknowledged. 

The 

power fail alert is turned off and the refrigerator  

 

 

will resume normal operation. 

Figure 30