Monogram ZGU384NSMSS Manual

Care and Cleaning

Gas Cooktop

Dual-flame
spill-proof
burners (cont.)

To remove the burner parts:

1. Turn all controls OFF before removing any

burner parts.

2. When cool, you may lift off the burner grates,

burner caps and burner heads for easier
cleaning. Do not remove the burner bases.

To replace the burner parts:

Make sure that the burner parts are replaced in
the correct location.

On model ZGU384, there is one large burner
head and burner cap and three sets of medium
burner heads and burner caps.

On model ZGU385, there is one large burner
head and burner cap and four sets of medium
burner heads and burner caps.

These burner parts are not interchangeable.

1. Replace the burner head on top of the burner

base, making sure that the hole in the burner
head is properly aligned with the electrode in
the burner base. A small gap between the
base and head is normal.

2. Place the burner cap on top of the burner

head. Make sure that the burner cap is
properly seated on the burner head.

Medium

Burner

Large

Burner

Medium

Burner

Medium

Burner

Medium

Burner

Medium

Burner

Medium

Burner

Medium

Burner

Burner head

Burner

base

Electrode

Burner cap

Burner cap not properly seated

Burner cap properly seated

NOTE: Before removing the burner parts,
remember their size and location. Replace
them in the same location after cleaning
for proper burner operation.

Large

Burner

Burner Assembly

Burner Cap Alignment