Dacor ER48D Utilização E Cuidado
Slots
Keyed hole
Ridge on bottom of
burner cap
Step
Step
Step
Tabs
Burner base
Put locating tab
into keyed hole
Burner ring
Burner head
8
Ridge on bottom of
burner cap
Step
Step
Step
Burner base
Burner ring
WARNING
To avoid the chance of fire, explosion or carbon monoxide
poisoning, do not attempt to use your range without the burners
completely and properly assembled. The burner rings spread
the flame evenly around the burner cap. The burner rings must
be properly seated for proper burner lighting and operation.
Cooktop Assembly
Stack Burner Assembly
1. Put the burner rings on the burner bases as shown below.
Match the correct sizes. The bottom of the correct size burner
ring fits inside the top of the matching burner base.
2. Turn the ring until it drops into place. Twist each ring back
and forth slightly to make sure it is properly seated.
3. Put the burner caps on top of the burner rings. The ridge
around the bottom edge of the cap goes around the top of
the burner ring.
Crown Burner Assembly
1. Put the burner heads in place as shown below. The locating
tab on the burner head goes in the keyed hole as shown.
2. Put the burner rings on the burner heads as shown below.
Match the tabs on the bottom of the ring to the slots on the
burner head. Twist each ring back and forth slightly to make
sure it is properly seated.
3. Put the burner caps on top of the burner rings. The ridge
around the bottom edge of the cap goes around the top of
the burner ring.
Setting Up Your Range
Burner Locations
Stack burners
Crown burners