Fire Magic 32791P Instrução De Instalação
1
No. L-C2-18909
REV 6 - 0906231541
SINGLE SIDEBURNER
Natural Gas or Propane Gas
Robert H. Peterson Co. • 14724 East Proctor Avenue, • City of Industry, CA 91746
Model # 3279-(1,2)(P)
INSTALLER: Please leave these instructions with the consumer. CONSUMER: Retain for future reference.
INSTALLATION AND OPERATING INSTRUCTIONS
DANGER
IF YOU SMELL GAS
:
1. Shut off the gas to the appliance.
2. Extinguish any open fl ame.
3. Open lid if equipped.
4. If odor continues, keep away from the appliance
2. Extinguish any open fl ame.
3. Open lid if equipped.
4. If odor continues, keep away from the appliance
and immediately call your gas supplier or fi re
department.
department.
WARNING
1. Do not store or use gasoline or other
fl ammable vapors and liquids in the vicinity
of this or any other appliance.
of this or any other appliance.
2. A propane cylinder not connected for use
shall not be stored in the vicinity of this or
any other appliance.
any other appliance.
CODE AND SUPPLY REQUIREMENTS: This unit
must be installed in accordance with local codes and
ordinances, or, in the absence of local codes, with either
the latest National Fuel Gas Code (ANSI Z223.1/NFPA
54), CAN/CGA-B149.1 (Natural Gas Installation Code),
or CAN/CGA-B149.2 (Propane Installation Code).
must be installed in accordance with local codes and
ordinances, or, in the absence of local codes, with either
the latest National Fuel Gas Code (ANSI Z223.1/NFPA
54), CAN/CGA-B149.1 (Natural Gas Installation Code),
or CAN/CGA-B149.2 (Propane Installation Code).
This appliance and its individual shutoff valves must be
disconnected from the gas supply piping system when
testing the system at pressures in excess of ½ psig (3.5
kPa).
disconnected from the gas supply piping system when
testing the system at pressures in excess of ½ psig (3.5
kPa).
This appliance must be isolated from the gas supply
piping system by closing its individual manual shutoff
valves during any pressure testing of the gas supply
system at pressures up to and including ½ psig (3.5
kPa).
piping system by closing its individual manual shutoff
valves during any pressure testing of the gas supply
system at pressures up to and including ½ psig (3.5
kPa).
All electrical outlets in the vicinity of the unit must be
properly grounded in accordance with local codes or, in
the absence of local codes, with the National Electrical
Code, ANSI/NFPA 70, or the Canadian Electrical
Code, CSA C22.1, which ever is applicable.
properly grounded in accordance with local codes or, in
the absence of local codes, with the National Electrical
Code, ANSI/NFPA 70, or the Canadian Electrical
Code, CSA C22.1, which ever is applicable.
Keep all electrical supply cords and fuel supply hoses
away from any heated surface.
away from any heated surface.
WARNING
Improper installation, adjustment, alteration,
service or maintenance can cause injury or
property damage. Refer to this manual. For
assistance or additional information consult
qualifi ed, professional installer, service agency,
service or maintenance can cause injury or
property damage. Refer to this manual. For
assistance or additional information consult
qualifi ed, professional installer, service agency,
or the gas supplier.
Certifi ed to:
ANSI Z21.58-2007
CSA
1.6-2007
09-41