Whirlpool WOD93EC0AS Instrução De Instalação

2. Remove the foot from the right front spacer by removing the 

#8-18 x 

³⁄₈" screw.

NOTE: Do not remove the spacer.

3. Rotate the foot 90° so the short side of the foot is positioned 

toward the top of the oven.

4. Reinstall the foot to the spacer using the #8-18 x 

³⁄₈" screw 

previously removed.

5. In the same manner, remove, rotate and reinstall the feet on 

the right rear, left front, and left rear of the oven.

6. Using 2 or more people, place the oven in its upright position. 

7. Go to the “Make Electrical Connection” section.

The positioning of the oven feet allow a double oven to be 
installed in a cutout height between 48

⁷⁄₈

" (124.1 cm) and 

5

2³⁄₁₆" (132.6 cm). Refer to the following instructions to position 

the feet for the size of your cabinet cutout.

The oven feet do not need to be installed. The oven is configured 
correctly as received.
NOTE: Do not remove the spacers.

Go to the “Make Electrical Connection” section.

³⁄₈

A

B

C

A

A