Broan B56 Instrução De Instalação

L

1. Construct wood wall framing that is flush with interior surface 

of wall studs.
Make sure:
a)  the framing is centered over installation location.
b)  the height of the framing will allow the mounting bracket

to be secured to the framing within the dimensions   
shown.

2. After wall surface is finished, carefully center and level the 

hood mounting bracket and secure it to wall framing with (3) 
#8 x 1-1/2” mounting screws. Tighten the screws completely.

NOTE:
On 8-ft. ceilings
Hood distance above cooktop is:
Minimum 30”, Maximum 36” (for ducted discharge)
Minimum 30”, Maximum 33” (for non-ducted discharge)
On 9-ft. ceilings
Hood distance above cooktop is:
Minimum 31”, Maximum 36” (for both ducted and non-ducted 
discharge)
On 10-ft. ceilings
Hood distance above cooktop is:
Minimum 31”, Maximum 36” (for both ducted and non-ducted 
discharge).
NOTE: 10-ft. ceilings require 10-ft. Flue Extension, Model 
FXN56SS for ducted or non-ducted installations (purchase 
separately).

9”

1. GROUNDING INSTRUCTIONS

This appliance must be grounded. In the event of an 
electrical short circuit, grounding reduces the risk of electric 
shock by providing an escape wire for the electric current. 
This appliance is equipped with a cord having a grounding 
wire with a grounding plug. The plug must be plugged into an 
outlet that is properly installed and grounded.

2. Position the electrical outlet within the space covered by the 

decorative flue and where it will not interfere with the round 
duct. Make sure the outlet is no further than 8¼” from where 
the cord exits from the hood and that the outlet does not 
interfere with a mounting bracket fastening area or where the 
decorative flue touches the wall.