Marvel M24ARSGPL Ficha De Características

13

Place module on top of the cabinet with rear shoulder 

screws resting on the locator brackets behind the front 

slots. Slide module toward the rear of the cabinet until the 

rear shoulder screws engage the slots in the rear of the 

brackets. Rest the front shoulder screws into the front slots 

of the brackets.

Check to make sure the wiring is clear and not interfering 

with module seal. Do NOT start product during construc-

tion, as dust can block module condenser coils. If dust ac-

cumulates on coils, vacuum immediately, using a soft brush 

attachment.

Figure 13

Rear 

shoulder 

screw-

Front 

shoulder 

screw-

When installed the power module is not fas-

tened to the cabinet. It must be removed 

when the cabinet is tipped or transported.

Use two or more people to move product.

Failure to do so can result in back or other injury.

Do not operate the refrigerator in the pres-

ence of explosive chemicals or fumes.

-Junction box

-Cabinet leads

-Power

cord

Power module on

top of cabinet-

Figure 14

Make electrical connections from the top of the lower cabi-

net to the junction box at left side of module. See module 

diagram Figure 14.

Run the power cord in front of power module on top of cabi-

net around the right side of power module to the electrical 

outlet. See Figure 14.