Gaggenau RF411701 Utilização E Cuidado
12
Rest Mode
When Rest Mode is switched On, the following
settings are switched Off:
settings are switched Off:
▯
Ice Maker
▯
Acoustic Signal
▯
Interior Light
▯
Messages in the Display Panel
▯
The background illumination of the Display Panel
is reduced
is reduced
▯
Buttons are locked.
Switching On
1.
Press and hold down the SUPER Button ³.
2.
Press the VACATION Button ¶.
3.
Press the SUPER Button ³ and hold down for
a further 3 seconds.
The “VACATION” symbol flashes on the Display
Panel and “RESTMODE” is displayed.
a further 3 seconds.
The “VACATION” symbol flashes on the Display
Panel and “RESTMODE” is displayed.
Switching Off
Press the VACATION Button ¶.
The previous settings and temperature values are
once again activated.
once again activated.
Energy Saving Mode
If the Energy Saving Function (Eco Function) is
activated, the appliance switches to the Energy Saving
Operation. This Energy Saving Function is preset
at the factory in order to reduce energy consumption.
The background illumination of the Display Panel is
likewise reduced.
activated, the appliance switches to the Energy Saving
Operation. This Energy Saving Function is preset
at the factory in order to reduce energy consumption.
The background illumination of the Display Panel is
likewise reduced.
Switching On
1.
Press the SETUP Button μ.
2.
Press the Selection Button ¿, until “ECO MODE”
and the current setting (OFF) is displayed.
and the current setting (OFF) is displayed.
3.
Press the Setting Button @, in order to reset
the setting.
the setting.
4.
Press the SETUP Button μ, in order to store
the setting.
“ECO” is displayed on the Display Panel.
the setting.
“ECO” is displayed on the Display Panel.
Switching Off
1.
Press the SETUP Button μ.
2.
Press the Selection Button ¿, until “ECO MODE”
and the current setting (ON) is displayed.
and the current setting (ON) is displayed.
3.
Press the Setting Button A, in order to reset
the setting.
the setting.
4.
Press the SETUP Button μ, in order to store
the setting.
the setting.
Alarm Function
Door Alarm
The Door Alarm switches On if an appliance door is
left open for longer than three minutes. Close
the door to switch Off the Warning Signal.
left open for longer than three minutes. Close
the door to switch Off the Warning Signal.
Temperature Alarm
The Temperature Alarm switches On if the Freezer
Compartment is too warm and the frozen food is at
risk of thawing.
Compartment is too warm and the frozen food is at
risk of thawing.
The set temperature of the Freezer Compartment
flashes and “ALARM” is displayed on the display
panel.
flashes and “ALARM” is displayed on the display
panel.
When the ALARM button ± is pressed,
the temperature display for the Freezer Compartment
indicates for five seconds the warmest temperature
reached in the Freezer Compartment.
the temperature display for the Freezer Compartment
indicates for five seconds the warmest temperature
reached in the Freezer Compartment.
Then this value is deleted. The temperature display for
the Freezer Compartment indicates the set Freezer
Compartment temperature without flashing.
the Freezer Compartment indicates the set Freezer
Compartment temperature without flashing.
Henceforth the “warmest temperature” will be
redefined and saved.
redefined and saved.
The alarm display goes out as soon as the set
temperature has been reached again.
temperature has been reached again.
The alarm may switch on without any risk to the frozen
food:
food:
▯
when the appliance is switched On,
▯
when large quantities of fresh food are placed
in the appliance,
in the appliance,
▯
if the Freezer Compartment Door is open too
long.
long.
Switching Off the Alarm
Press the ALARM button ± to switch Off the Warning
Signal.
Signal.