Monogram ZIC30GNHII Guia Do Desenho

• 1/4" copper water line tubing or GE SmartConnect

™

Refrigerator Tubing kits

• Water shut-off valve
• Custom panels for fresh food door, freezer drawer

and Convertible drawer

• Velcro w/adhesive if using custom toekick.

For proper installation, this refrigerator must be
placed on a level surface of hard material that is at
the same height as the rest of the flooring. This
surface should be strong enough to support a fully
loaded refrigerator, or approximately 1,200 lbs.

NOTE: Protect the finish of the flooring. Cut a large
section of the cardboard carton and place under 
the refrigerator where you are working.

• 5/32" Allen wrench
• Utility knife
• Stepladder
• Bucket
• Level
• Appliance hand truck
• Tubing cutter
• 7/16" open-end wrench
• 1-5/16" open-end wrench
• #2 Phillips screwdriver
• Drill and  bit set
• 5/16" socket 
• Safety glasses
• Pliers
• 3/8" ratchet
• Torx T-20, T-30 wrench

• Anti-tip bracket & screws
• Panel mounting brackets
• Door panel templates- Pub # 31-46543
• Water filter - Part # GSWF
• Drywall Anchors and screws