Monogram ZIC30GNHII Guia Do Desenho

Up

The rear leveling wheels and front leveling legs are
limited to a maximum height adjustment of 1". If the
installation requires more than 84-1/2" height, the
installer should elevate the refrigerator on a sheet 
of plywood or runners. Cabinetry trim could also be
added across the top of the opening to shorten the
opening. 

Leveling Leg

Hex Nut

Adjusts Rear

Wheels

Supplied Toekick

Vent Holes

Toekick Holes

All models have 4-point leveling. The front is supported
by leveling legs; the rear is supported by adjustable
wheels. Both are accessible from the front of the
refrigerator.
• To level the back of the refrigerator, turn the 5/16" hex

nut located above the front wheels. Turn counter
clockwise to raise or clockwise to lower the
refrigerator.

• For front leveling, use a 1-5/16" open-end wrench.
• Adjust height of refrigerator to match installation

cutout opening. The refrigerator should be level and
plumb with cabinetry.

• Locate the toekick, vent and screws (removed earlier). 
• A custom toekick can be installed to match or 

complement the surrounding cabinetry. Use the
supplied toekick as a template.

• Reinstall the vent using the screws removed earlier.
• Reinstall the toekick .