Miele G4975 Manual Do Proprietário

Options

43

Optimize Standby

"Optimize Standby" is activated by de‐

fault.
To save energy, the dishwasher will

switch off automatically a few minutes

after the last time a button has been

pressed or after the end of a program.

The dishwasher will not turn off while

a program is running, during the delay

start period, or if there is a fault.

Optimize Standby can be switched off if

you prefer. If you do this the duration

before the dishwasher switches off au‐

tomatically increases to 6 hours. Doing

this will increase energy consumption.
 Open the door.
 Turn the dishwasher off with the 

button, if it is turned on.

 Press the program selection button



, and, simultaneously switch the

dishwasher on using the  button. 

Keep the program selection button 

pressed in for at least four seconds

until the lower right program indicator

light comes on.

If this does not happen, start the proce‐

dure from the beginning again.

 Press the  button 8 times.
The  indicator light will flash 8 times

at short intervals.
The flashing sequence in the display

shows whether or not Optimize Stand‐

by is activated.

–  : "Optimize Standby" activated
–  : "Optimize Standby" deactivated

 Press the program selection button 

to change the setting.

The setting is now stored in memory.
 Turn the dishwasher off with the 

button.