Danby DMW14SA1WDB Utilização E Cuidado

1) Press SENSOR REHEAT and place food into the oven. ‘SC-1’ will display. 

2) Press START/+30SEC to start the sensor reheat function, there is no need to 
set a time.

3) The sensor will sound twice when it senses steam. The remaining cook time 
will be displayed, and the unit will sound 5 times when cooking is done. 

The oven cannot sensor reheat when the temperature  of the oven cavity is 
already high.

Food to be reheated must be have a vented cover. 

Use microwave safe platters only.

During sensor reheat, please do not open the door or press the STOP/CANCEL 
button. 

Food to avoid in sensor reheat mode:

•  Bread and other dry foods like biscuits, pastry.
•  Raw or uncooked foods
•  Beverages and frozen foods

This microwave oven is capable of remembering up to 3 favorite settings. To set 
a favorite power level and time setting:

1) Press FAVORITE once to set favorite setting one, twice to set favorite setting 
two, and three times to set favorite setting 3.  

2) Press COOK TIME, then enter cooking time using number pad.

3) Press POWER LEVEL, press number corresponding with desired power level

4) Press FAVORITE  to save the setting. 

5) To run the favorite program, press FAVORITE the number of times that cor-
responds with the favorite setting number (once  for favorite setting one, twice for 
favorite setting two etc.) then press START/+30SEC.   

Note: The auto menu functions cannot be saved as favorites. 

While the oven is cooking, you may press CLOCK to display the time for three 
seconds before the display returns to the cooking time. 

While the oven is cooking, you may press POWER LEVEL to display the current 
power level. After three seconds, the display will return to the cooking time. 

The safety lock prevents unsupervised operation by children. 

To set, press and hold STOP/CANCEL for 3 seconds. A long ‘beep’ will indicate 
that the setting has been accepted. 

To cancel, press and hold STOP/CANCEL for 3 seconds. 

A long ‘beep’ will indi-

cate that the setting has been accepted.