Danby DMW14SA1WDB Utilização E Cuidado

Página de 50
GROUNDING INSTRUCTIONS
DANGER: ELECTRIC SHOCK HAZARD
Touching some of the internal components can cause  
serious injury or death. DO NOT disassemble this appliance.
f
Improper grounding can result in electric shock. Do not plug 
unit into an outlet until the appliance is properly grounded.
 
WARNING: ELECTRIC SHOCK HAZARD
This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by 
providing an escape wire for the electric current. This appliance comes with a cord that is equipped with a grounding wire 
and grounding plug. The plug must be plugged into an outlet that is properly installed and grounded. 
Consult a qualifi ed electrician or serviceman if the grounding instructions are not completely understood or if doubt exists 
as to whether the appliance is properly grounded. If it is necessary to use an extension cord, use only a 3-wire extension 
cord that has a 3-pronged grounding plug, and a 3-slot receptacle that will accept the plug on the appliance. The marked 
rating of the extension cord shall be equal to or greater than the electrical rating of the appliance. 
A short power-supply cord is provided to reduce the risks resulting from becoming entangled in or tripping over a longer 
cord.
Longer cord sets or extension cords are available and may be used if care is exercised in their use.
If a long cord set or extension cord is used:
1) The marked electrical rating of the cord set or extension cord should be at least as great as the electrical rating of the 
appliance
2) The extension cord must be a grounding type 3 wire cord, and;
3) The cord should be arranged so that it will not drape over the countertop or tabletop where it could be pulled on by 
children or tripped over unintentionally. 
(grounding)  plug
Three-pronged
Operation of the microwave oven may cause interference to your radio, TV or similar equipment. 
When there is interference, it can be reduced or eliminated by taking the following action: 
1) Clean door and sealing surface of oven 
2) Reposition the receiving antenna of the radio or television
3) Relocate the microwave oven with respect to the receiver
4) Move the microwave oven away from the receiver
5. Plug the microwave oven into a different outlet so that microwave oven and receiver are on different branch circuits
RADIO INTERFERENCE
4