Summit FS408BLBIIF Manual Do Proprietário
5
Improper use of the grounded plug can result in the risk of electrical shock. If the power
cord is damaged, have it replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
Avoid locating the unit in moist areas. Too much moisture in the air will cause
frost to form quickly on the evaporator requiring more frequent defrosting of
the freezer.
frost to form quickly on the evaporator requiring more frequent defrosting of
the freezer.
Plug the unit into an exclusive, properly installed and grounded wall outlet. Do
not under any circumstances cut or remove the third (ground) prong from the
power cord. Any questions concerning power and/or grounding should be
directed toward a certified electrician or authorized service center.
not under any circumstances cut or remove the third (ground) prong from the
power cord. Any questions concerning power and/or grounding should be
directed toward a certified electrician or authorized service center.
Electrical Connection:
This unit should be properly grounded for your safety. The power cord of this unit
is equipped with a three-prong plug which mates with a standard three-prong wall
outlet to minimize the possibility of electrical shock.
is equipped with a three-prong plug which mates with a standard three-prong wall
outlet to minimize the possibility of electrical shock.
Do not under any circumstances cut or remove the third ground prong from the
power cord supplied. For personal safety, this appliance must be properly
grounded.
power cord supplied. For personal safety, this appliance must be properly
grounded.
This unit requires a standard 115-volt AC/60Hz electrical outlet with three-prong
ground. Have the wall outlet and circuit checked by a qualified electrician to
make sure the outlet is properly grounded. When a standard 2-prong wall outlet
is encountered, it is your responsibility and obligation to have it replaced with a
properly grounded 3-prong wall outlet.
ground. Have the wall outlet and circuit checked by a qualified electrician to
make sure the outlet is properly grounded. When a standard 2-prong wall outlet
is encountered, it is your responsibility and obligation to have it replaced with a
properly grounded 3-prong wall outlet.
To prevent accidental injury, the cord should be secured behind the unit and not
left exposed or dangling.
left exposed or dangling.
The unit should always be plugged into its own individual electrical outlet which
has a voltage rating that matches the rating label on the appliance. This provides
the best performance and also prevents overloading house wiring circuits that
could cause a fire hazard from overheated wires. Never unplug the unit by pulling
on the power cord. Always grip the plug firmly and pull straight out from the
receptacle. Repair or replace immediately any power cord that has become
frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion
damage along its length or at either end. When moving the unit, be careful not to
damage the power cord.
has a voltage rating that matches the rating label on the appliance. This provides
the best performance and also prevents overloading house wiring circuits that
could cause a fire hazard from overheated wires. Never unplug the unit by pulling
on the power cord. Always grip the plug firmly and pull straight out from the
receptacle. Repair or replace immediately any power cord that has become
frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion
damage along its length or at either end. When moving the unit, be careful not to
damage the power cord.
Extension Cord:
Do not use an extension cord with this appliance. If the power cord is too short,
have a qualified electrician or service technician install an outlet near the
appliance.
have a qualified electrician or service technician install an outlet near the
appliance.