Vent-a-Hood PRH6K30WH Instrução De Instalação

Page 3

L114A 1211A

Ceiling Cutout for Vertical Ducting

Viewed from Above

Back of Cabinet

Electrical

�⁄�"

3 ½"

5 �⁄�"

6 ¼"

2 �⁄�"

Installation Details

1) Read all instructions thoroughly before beginning installation.

2) When installing the K-Series under cabinet hood, it is recommended that the bottom edge of the hood be located no

more than 21” - 24” above the cooking surface for optimum performance.

3) Inspect the underside of the cabinet for a flush mounting surface. If the underside of the cabinet is recessed, install

wood strips to provide a flush surface for the hood mounting screws to engage.

4) Determine whether the hood will discharge horizontally or vertically. The hood is shipped to discharge vertically but is

easily converted to horizontal discharge by exchanging the discharge adapter on top of the hood (4 screws) with the

discharge cover on the back of the hood (2 screws). Use duct tape to seal the discharge adapter and discharge cover

to the hood.

5) IF THE HOOD IS TO BE “BACK VENTED”, PROCEED DIRECTLY TO STEP 6.

Install the duct from the outside of the home down to the location of the hood exhaust outlet allowing room for the

VP521 transition on the top of the hood (if applicable). If a VP521 transition is used, install the duct down to the location

of the transition outlet plus 1”. This will allow the transition to engage 1” inside of the duct. Consult the connection

diagram (below) for further details on exhaust outlet placement.

Use duct tape to seal all joints. A complete listing of available Vent-A-Hood ducting materials is provided on the back

page of this instruction sheet.

Transition height: 3 1/4” x 10” duct will connect directly to the exhaust outlet of the hood. Optional VP521 transition

to 7” round (sold separately) is 7 1/2” tall.