Intel WX58BP Manual Do Utilizador
Intel Desktop Board WX58BP Technical Product Specification
48
2.3
Jumper Block
CAUTION
Do not move the jumper with the power on. Before changing a jumper setting, always
turn off the power and unplug the power cord from the computer. Otherwise, the
board could be damaged.
turn off the power and unplug the power cord from the computer. Otherwise, the
board could be damaged.
Figure 14 shows the location of the jumper block. The 3-pin jumper block determines
the BIOS Setup program’s mode. Table 21 describes the jumper settings for the three
modes: normal, configure, and recovery. When the jumper is set to configure mode
and the computer is powered-up, the BIOS compares the processor version and the
microcode version in the BIOS and reports if the two match.
the BIOS Setup program’s mode. Table 21 describes the jumper settings for the three
modes: normal, configure, and recovery. When the jumper is set to configure mode
and the computer is powered-up, the BIOS compares the processor version and the
microcode version in the BIOS and reports if the two match.
Figure 14. Location of the Jumper Block