Intel WX58BP Manual Do Utilizador
65
4
Error Messages and Beep Codes
4.1
Speaker
The board-mounted speaker provides audible error code (beep code) information
during POST. For information about the location of the onboard speaker, refer to
Figure 1.
during POST. For information about the location of the onboard speaker, refer to
Figure 1.
4.2
BIOS Beep Codes
Whenever a recoverable error occurs during POST, the BIOS displays an error
message describing the problem (Table 31).
message describing the problem (Table 31).
Table 31. Beep Codes
Type
Pattern
Frequency
Memory error
Three long beeps
1280 Hz
Thermal warning
Four alternating beeps:
High tone, low tone, high tone, low tone
High tone, low tone, high tone, low tone
High tone: 2000 Hz
Low tone: 1600 Hz
Low tone: 1600 Hz
4.3
BIOS Error Messages
Table 32 lists the error messages and provides a brief description of each.
Table 32. BIOS Error Messages
Error Message
Explanation
CMOS Battery Low
The battery may be losing power. Replace the battery soon.
CMOS Checksum Bad
The CMOS checksum is incorrect. CMOS memory may be corrupted. Run
Setup to reset values.
Setup to reset values.
Memory Size Decreased
Memory size decreased since the last boot. If no memory was removed,
then the memory may be bad.
then the memory may be bad.
No Boot Device Available
System did not find a device to boot.