Verona VEFSGE365NE Instrução De Instalação

Página de 28
IMPORTANT - PLEASE READ AND FOLLOW
Before beginning, please read these instructions completely and carefully.
Do  not  remove  permanently  affixed  labels,  warnings,  or  plates  from  the  product.  This
may void the warranty.
Please observe all local and national codes and ordinances.
Please ensure that this product is properly grounded.
The installer should leave these instructions with the consumer who should retain
for local inspector's use and for future reference.
Installation must conform with local codes or in the absence of codes, the National Fuel
Gas Code ANSIZ223.1 - Iatest edition. Electrical installation must be in accordance with the
National  Electrical  Code,  ANSI/NFPA70  -  latest  edition  and/or  local  codes.  IN  CANADA:
Installation  must  be  in  accordance  with  the  current  CAN/CGA-B149.1  National  Gas
Installation  Code  or  CAN/CGA-B149.2,  Propane  Installation  Code  and/or  local  codes.
Electrical  installation  must  be  in  accordance  with  the  current  CSA  C22.1  Canadian
Electrical Codes Part 1 and/or local codes.
INSTALLATION IN MANUFACTURED (MOBILE) HOME: The installation must conform with
the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280 [for-
merly the Federal Standard for Mobile Home Construction and Safety, Title 24, HUD (Part
280)]  or,  when  such  standard  is  not  applicable,  the  Standard  for  Manufactured  Home
Installations, ANSI/NCSBCS A225.1, or with local codes where applicable.
INSTALLATION  IN  RECREATIONAL  PARK  TRAILERS:  The  installation  must  conform  with
state or other codes or, in the absence of such codes, with the Standard for Recreational
Park Trailers, ANSI A119.5. 
Installation of any gas-fired equipment should be made by a Iicensed plumber. A manual
shut-off  valve  must  be  installed  in  an  accessible  location  in  the  gas  line  external  to  the
appliance  for  the  purpose  of  turning  on  or  shutting  off  gas  to  the  appliance  (In
Massachusetts such shutoff devices should be approved by the Board of State Examiners
of Plumbers & Gas Fitters).
If an external electrical source is utilized, the appliance, when installed, must be electrical-
ly  grounded  in  accordance  with  local  codes  or,  in  the  absence  of  local  codes,  with  the
national Electrical Code, ANSI/NFPA 70.
This  range  is  supplied  with  a  protective  film  on
steel  and  aluminium  parts.
This  film  must  be  removed  before  installing/using  the  appliance.
FOR INSTALLER ONLY
THIS RANGE IS FOR RESIDENTIAL USE ONLY
• INSTALLATION INSTRUCTIONS
IMPORTANT - PLEASE READ AND FOLLOW
SINGLE OVEN  DUAL  FUEL  RANGE
for  residential  use  only
Models:
VEFSGE 365 ..