Movincool CM12 Guia De Especificação

                                          

BULLETIN NO: MB06-0001
MODEL:    

                

DATE:       

PAGES:     

:

 

Do not connect thermostat to AC power source.

Preparation for Thermostat Connection

1. Use with a single stage wall thermostat (Millivolt-System).
2. Set the wall thermostat to cooling system mode, since most wall thermostats 

are designed for both heating and cooling.

3. Prepare the wire harness for connection from the unit to the thermostat.  

The recommended wire size is: 16-26 AWG.
Wire type: Thermostat cable/ solid wire.

4. Identify the thermostat connectors labeled G, G1, Y, and RC.

G (Fan on/off), G1 (Fan speed HI/LO), Y (cooling on/off), and RC 
(Cooling Transfer-Common).

Wall Thermostat Connector 

Name

CM12 WIRES

Function

Label Name

Color

RC

RC

Brown

Common

Y

Y

Red

Cool On/Off

G

G

Orange

Fan On/Off

G1

G1

Yellow

Fan Hi/Low

 

5. Install the wall thermostat to the proper location inside the room where it can be conven-

iently accessed.  Do not install the wall thermostat where unusual heating 
condition may occur (i.e. hot stove, hot pipe, fireplace, direct sunlight, etc.)

6.    Most thermostats provide these basic functions:

Fan Mode: On / Auto (Select the desire fan mode)
System: Cool / Heater (Select cool only)