Monogram ZV850SPSS Ficha De Características

Página de 2
Specification Created 6/09
130680
ZV850SPSS 
GE Monogram
®
 
36" Stainless Steel Island Hood
 
605Dia150
*Height 
to Ceiling
8-1/4"
35-3/8"
27-1/2"
This vent hood may be vented to the outdoors or it can be 
installed for recirculating operation. All necessary parts 
for recirculating operation are supplied with the hood.  
No kits required.
A decorative duct cover is provided to cover the duct  
from the top of the hood to a 7'11" to 8'7" ceiling for vent 
mode (8'11" for recirculating mode).
Accessories:  
An optional stainless steel duct cover is available for 8'7"  
to 10'1" ceiling heights for vent mode (10'4" for recirculating 
mode). Order ZX8510SPSS optional duct cover at the same 
time as the vent hood and have on site before installation.
For answers to your Monogram,
®
 GE Profile
  
or GE
®
 appliance questions, visit our website  
at geappliances.com or call GE Answer Center
®
 
 service, 800.626.2000.
Dimensions and Installation Information (in inches)
Listed by 
Underwriters 
Laboratories
Dimensions and Clearances: 
The vent hood should be installed 24" min. and 30" max. 
above the cooking surface, dependent on the ceiling height. 
The cooking surface should be at least 36" above the floor. 
Installation will be easier if the vent hood is installed before 
the range or cooktop/countertop is installed.
This hood can be installed over a Monogram electric or gas 
cooktop. It cannot be installed over a Monogram professional 
rangetop or range.
Installation Information: Before installing, consult 
installation instructions packed with product or available  
on monogram.com for current dimensional data.
Note: Installation height should be measured from the 
cooking surface to the lower edge of the hood.
605Dia151
24" to 30"
36" Min.
The exact installation height is determined by the ceiling height 
and duct cover trim strips provided with the hood. For optimum 
performance, the hood must be installed 24" min. and 30" max. 
above the cooking surface.