Monogram ZV750SPSS Ficha De Características

Página de 2
Specification Created 6/09
130681
ZV750SPSS 
GE Monogram
®
 
36" Stainless Steel Wall-Mounted Hood
 
605Dia148
*Height 
to Ceiling
8-1/4"
34-5/8"
21-5/8"
This vent hood may be installed onto a wall and vented 
to the outdoors, or it can be installed for recirculating 
operation. All necessary parts for recirculating operation 
are supplied with the hood. No kits required.
A decorative duct cover is provided to cover the duct  
from the top of the hood to a 7'11" to 9'2" ceiling for vent 
mode (9'6" for recirculating mode).
Accessories:  
An optional stainless steel duct cover is available for 9'  
to 10'3" for vent mode (10'8" for recirculating mode) ceiling 
heights. Order ZX7510SPSS optional duct cover  
at the same time as the vent hood and have on site  
before installation.
For answers to your Monogram,
®
 GE Profile
  
or GE
®
 appliance questions, visit our website  
at geappliances.com or call GE Answer Center
®
 
service, 800.626.2000.
Dimensions and Installation Information (in inches)
Listed by 
Underwriters 
Laboratories
Dimensions and Clearances: 
The vent hood should be installed 24" min. and 30" max. 
above the cooking surface. The cooking surface should be  
at least 36" above the floor. Installation will be easier if the 
vent hood is installed before the range or cooktop/countertop 
is installed.
This hood can be installed over a Monogram electric or gas 
cooktop. It cannot be installed over a Monogram professional 
rangetop or range.
Installation Information: Before installing, consult 
installation instructions packed with product or available  
on monogram.com for current dimensional data.
Note: Installation height should be measured from the  
cooking surface to the lower edge of the hood.
605Dia149
24" to 30"
36" Min.
The vent hood must be installed 24" min. and 30" max. above 
the cooking surface depending on the ceiling height.