Lynx LIJ42 Guia Da Instalação
If the burner stays lit only while holding the
safety button, it may be adjusted (after it has
cooled) as shown.
safety button, it may be adjusted (after it has
cooled) as shown.
Match Lighting:
If burners will not light after several attempts, the burners can be match lit.
If you’ve just attempted to light the burner with the igniter, allow 5 minutes for any accumulated
gas to dissipate.
gas to dissipate.
Grill Burners: Make sure all knobs are in the OFF position. Keep your face as far away from
the grill as possible. With the Lid open, pass a lit, long stemmed match to the ports of the burn-
the grill as possible. With the Lid open, pass a lit, long stemmed match to the ports of the burn-
er. Push and turn the corresponding control knob of the
burner to “Lite”. If the burner does not light in 4 seconds,
turn the knob off and wait 5 minutes before attempting
again.
burner to “Lite”. If the burner does not light in 4 seconds,
turn the knob off and wait 5 minutes before attempting
again.
Match Lighting
17
Grill Burner
Burner Ports
Rotis Burner: Make sure all knobs are in
the OFF position. With the Lid open pass a
lit, long stemmed match to the burner tiles of
the Infra-Red burner. Push and turn the Rotis
control knob to “Lite” then press and hold the
safety valve button. If the burner does not
light in 4 seconds, turn the knob off and wait
5 minutes before attempting again.
the OFF position. With the Lid open pass a
lit, long stemmed match to the burner tiles of
the Infra-Red burner. Push and turn the Rotis
control knob to “Lite” then press and hold the
safety valve button. If the burner does not
light in 4 seconds, turn the knob off and wait
5 minutes before attempting again.
Rotis Burner
Burner Tiles
Keep end
close to tiles
Keep cool
Thermocouple
Rev. 11/2004