Maytag MGDB755DW Manual Do Proprietário

7

Settings shown and options in bold are default settings for that cycle.

Not all features and cycles are available on all models.

Not all settings and options are available on each cycle.

Settings and options shown in bold are default settings for that cycle.

Not all settings and options are available on each cycle.

Steam cycles are designed for use with dry loads to loosen wrinkles, reduce odors, and refresh fabrics.

Load Size Recommendations
For best results, follow the load size recommendations noted  

for each cycle. 

Small load: Fill the dryer drum with 3–4 items, not more than 

1/4 full. 

Medium load: Fill the dryer drum up to about 1/2 full. 

Large load: Fill the dryer drum up to about 3/4 full.  

Do not overload. Items need to tumble freely.

†  

You may select the “Wrinkle Prevent with Steam” setting to add a short steam cycle after 60 minutes. This is available only with High and 

Medium Temperature settings. 

  Depending on settings, Steam option may be disabled to protect clothing and optimize performance.

†

  You may select the “Wrinkle Prevent with Steam” setting to add a short steam cycle after 60 minutes.

Adjusting drying time on Timed Cycles

When you select a Timed Cycle, 

the default time appears in the 

display. Use the “+” and “–” 

buttons to increase or decrease 

the time in 1-minute increments. 

Touch and hold to change the  

time in 5-minute increments.
The maximum dry time is 150 minutes.

Selecting the Temperature

A High heat setting may be used for drying heavyweight items such 

as towels and work clothes.
A Low to Medium heat setting may be used for drying medium-

weight items such as sheets, blouses, dresses, underwear, 

permanent press fabrics, and some knits.
Use a no heat (air dry) setting for foam, rubber, plastic, or heat-

sensitive fabrics.
Line dry bonded or laminated fabrics.
NOTE: If you have questions about drying temperatures for various 

loads, refer to the care label directions.

Items to dry:

Cycle:

Temperature:

Default 

Time:

Available 

Options:

Cycle Details:

Any load  

NOTE: Select Air 

Only to dry foam, 

rubber, plastic, 

or heat-sensitive 

fabrics. 

Timed Dry

40

Wrinkle 

Prevent

†

Use to dry items to a damp level for items 

that do not require an entire drying cycle. 

Select a drying temperature based on 

the type of fabrics in your load. If you are 

unsure of the temperature to select for a 

load, select the lower setting rather than 

the higher setting. 

Small loads and 

sportswear

Rapid Dry

15

Wrinkle 

Prevent

†

For small loads of 3–4 items.

Items  

to refresh:

Cycle:

Temperature:

Available 

Options:

 

Cycle Details:

Mixed Loads

Steam Refresh  

(on some models)

Wrinkle Prevent

†

Use to smooth out wrinkles and reduce odors from 

loads.