Zephyr ZTAE30AS Manual
Installation –
Recirculating
11
For Tamburo (ZTA) only:
Unscrew and remove the front cover
Unscrew and remove the front cover
2. Remove air diverter plate slot covers. Remove metal
air diverter plate from front slot and re-position to back
slot. Re-install air diverter plate covers.
air diverter plate from front slot and re-position to back
slot. Re-install air diverter plate covers.
1. Change rocker switch position from I to 0.
Rocker switch is located on electrical box to the right
of motor housing.
Rocker switch is located on electrical box to the right
of motor housing.
3. Using components from ZRC-0200, install (2)
charcoal lter brackets and center panel to
bottom of the hood with (4) screws for each
component. Screws are pre-installed to the hood.
Remove screws rst to install brackets and center
panel then re-install screws..
charcoal lter brackets and center panel to
bottom of the hood with (4) screws for each
component. Screws are pre-installed to the hood.
Remove screws rst to install brackets and center
panel then re-install screws..
4. Install charcoal lters into charcoal lter brackets
5. Install the mesh lters.
back slot
front slot
Note: To use hood in air recirculating mode please purchase recirculating kit ZRC-0200
metal air
diverter
plate
diverter
plate
charcoal lter
bracket
center
panel
charcoal lter
bracket
rocker switch