Monogram ZDP304NPSS Ficha De Características

Página de 3
For answers to your Monogram,
® 
GE Profile
 or 
GE
®
 appliance questions, visit our website at 
ge.com or call GE Answer Center
®
 service,  
800.626.2000.
130553
Specification Created 7/08
Listed by 
Underwriters 
Laboratories
ZDP304NPSS (Natural Gas)
ZDP304LPSS (Liquid Propane)
GE Monogram
® 
30" Dual-Fuel Professional Range with 4 Burners
Dimensions and Installation Information (in inches) 
 All Professional Ranges are factory set for natural or liquid 
propane gas. The correct model should be ordered for the 
installation situation.
Note: Conversion kits are included with the range if the wrong 
gas type was ordered. High Altitude kit, WB28K10553 for 
operation above 3,000 feet, is also available. The kits must be 
installed by a qualified service technician at additional cost.
Installation Information
Before installing, consult installation instructions packed with 
product or online at Monogram.com for current dimensional 
data.
A 30" or 36" wide professional vent hood with a minimum 300 
CFM is recommended for installation over this range. Install 
the hood 30" to 36" above the cooking surface.
Advance Planning
Refer to dimensional drawings for appropriate placement 
and necessary clearances when planning the installation.
•  Working areas adjacent to the range should have 18" 
minimum clearance between countertop and cabinet 
bottom.
•  Clearance between range and side wall or combustible 
material must be at least 12" on each side.
•  Installation must conform with local codes. In the absence 
of local codes, the range must comply with the National 
Fuel Gas Code, ANSI Z223.1-990.