Friedrich AG Guia Da Instalação

These instructions cover the installation on an Architectural Grille, Model AG, into a WSC model solid-side sleeve.  
The Architectural Grille must be installed just prior to the installation of the air conditioner chassis.

The contents of the package are:
 1. AG 

Architectural 

Grille

 

2. 

Brackets, 2 each

 3. Fiber 

strap

 

4. 

Screws (10 each)

 5. Instructions

Tools required for installation:  A fl at-blade screwdriver or 1/4" hex. nut driver.

STEP 1.  WSC sleeve should have been installed as specifi ed in the Sleeve Installation Instructions.  Remove 

the front closure panel, louvered metal grille and back weather panel in the sleeve.  Should the air 
conditioner chassis be in the sleeve, remove the chassis and the louvered metal grille using proper 
procedures.  

STEP 2.  Install the mounting brackets.  The brackets are not interchangeable.  See Figure 1 below to identify 

the correct bracket.  Position the left bracket on the left fl ange inside of the WSC sleeve, towards the 
back, so that the three holes on the bracket line up with the holes on the sleeve fl ange (same holes 
used to mount the louvered grille just removed).  Mount with the three screws provided.  Repeat the 
procedure to install the right side bracket.   See Figure 1.

617-408-01 (7-05)